Can you jump the cue ball

Being able to shoot comfortably with this angle is important. Robin Dodson teaches this to people at her Frog demo. Wear a hat with a brim. Seriously, for training purposes.

Looking up sometimes makes people prematurely come out of their stance prior to hitting the ball. You want all of your stroke going into the cueball.

That being said, your aim line should be correct before you get down on the shot. Aim at the pit. For starters, hitting at the dead center of the ball where the pit would be is going to get you the most bang. Hard tip. Earl Strickland used to shoot with a tremendously hard tip for the times, and he always complained about other people not jumping with their shooting cue. Let the cue do the work. This seems to be true for any shot: draw shot, break shot, and even the jump shot.

If you concentrate on hitting the center of the cueball, with an angled cue, with a real stroke, it will jump, and jump higher than you can imagine. Think of a jump shot as any other shot. The last one is mostly used for trick shots, so you might not find a good tutorial. Try this.. Aim at just below center mass not at bottom where white touch the table. Reduce cue angle to degrees. Contact tip on white nearer equator less on top..

Hold cue very lightly i use just 2 fingers flick using wrist like as in throwing darts timing it to just reach the white, causing cue to very quickly bounce off white fast, to allow space for the white to begin to elevate. These tips will help for both techniques, normal cueing action hold cue short and bend wrist in towards body and the technique where cue out in front "just as in throwing darts".

Last tip "think cue speed not "cue power. Jump shots require chalk for every attempt. For shots when the blocker is closer and you clearly have to increase the cue angle, ensure tip contact point far enough towards edge of white leaving room space for white to lift. This might help visualize, looks real good to me.

I hope you can see why chalk is so important in jump shots. You are trying to hit the white hard into the table but, still hit near edge or equator if you prefer that term.

No tip grip, no power transfer to white equals no jump. Remember to aim the shot slightly thicker dependent on how much white bounce expected than it looks as white will be bouncing which makes object ball cut thin.

Sign up to join this community. The best answers are voted up and rise to the top. Stack Overflow for Teams — Collaborate and share knowledge with a private group. Create a free Team What is Teams? This is a hard maple here, and the tip has got to be very hard. In this case, we have a combination of a ferrule and tip that's like a G So it's a very hard material. The harder it is on the tip and the shaft itself, the easier it's going to jump. Now that we covered the equipment, let's talk about contact points.

To get one thing out of the way right away, in order to hit a proper jump shot you do not need to go low on the cue ball. That means definitely not a scoop or anything like that. I'm going to use the rail as an example here. Even if your cue ball is right here, you can still contact the cue ball and doing proper jump shots. So in this case, it's going to be right above, slightly above the center. We're going to move it back so you can see it. What I did is I set up a pretty easy shot here for Valerie.

She's just going to show you how to jump the cue ball over this, into the one ball. So she's going to hit just right there, right above the center. The proper jump shot techniques. So that's the question I get a lot and I think there's another big misconception again here. Most people think you have to hit it really hard, follow through all the way down the table, but it's actually entirely false.

To me, a jump cue is an anti-pool shot. Think a short, fast poke. Again, I'm going to use a reference to Bruce Lee would say the one inch punch. It's really just a lot of power in a very short time, just like this. And your physical abilities shouldn't really matter because it's such an easy motion, as long as you have a quick release, you should be good. So this way works really good dart style.

It works really good this way as well, like this. And of course, if you really try and show off, one when just like this as well.

So that's to show you how easy it is to actually jump a ball. Now that we covered the physics of the shot, let's talk about mechanics. So first we're going to cover a standard jump shot. Same thing also 45 degrees, and that requires a little more follow through. It depends on the person, some people like the dart grip and some people like the American grip. To me, the American grip is going to allow you to aim better. While the dart grip is going to allow you to jump easier. I'm going to go ahead and set up a jump shot for you.

In this case, it's clearly a jump shot. So I'm going to go ahead and line up my shot, try to aim for it. And that's another lifesaving shot for when your opponent plays a safety or if you just played bad position.

So you know you're going to cut that much off a normal cue. And the shafts are also thicker so more rigid. But the main thing is it's a heavier cue, which is going to allow you to hold it vertically, which is going to help you go further with the ball.

Ok, so the best way for me to teach you how to jump a ball is to practice this drill. I just put the 1, 2, and 3 balls frozen to the rail and frozen to each other, and then the 9, 10, and 11 about a diamond away. It's about as easy as it gets for distance. So again just grab your jump cue, raise it 45 degrees, and with a short fast poke we're going to try and make the 1, the 2, and the 3 without touching this line out here. Now, I only set up three balls, but you could put a lot more balls on the table.

The more you put on the table, the tougher the angle is going to be. But it's basically the best drill you can get. And what you're going to do is you're going to try to find your way, so you can identify how much spin and how much backspin you need to put on each ball. But it will be worth it at the end of the day. I know that seemed pretty difficult, right? But with this guy's help, I'm pretty sure you're gonna get it. And make sure to check out our next episode Rack and Break.

That's it! And if you want to see more, please subscribe to my channel and check out PoolDawg.